SELECTION GUIDE FOR AUTOMATIC MECHANICAL GREASE WORKER:
- What is Automatic Mechanical Grease Worker : AnAutomatic Mechanical Grease Workeris alaboratory testing instrument used to measure the consistency and stability of lubricating greaseby mechanically working (kneading) the grease under controlled conditions
- Working principle of Operations for Automatic Mechanical Grease Worker As per ASTM D 217 : The Automatic mechanical grease worker as per astm d 217 instrument repeatedlymoves a perforated piston up and down inside a grease cup, forcing the grease through small holes. This process simulates themechanical working that grease experiences in real machinery such as bearings and gears
- Which ASTM Method Automatic grease worker machine follows.
- ASTM D217 Automatic grease working machine
- How many strokes grease worker machine usually do. : Typically, the grease is worked60 or 10,000 Or 1,00,000 strokes in grease worker machine, after which its consistency is measured using a penetrometer according to standards likeASTM D217
- Components Used in Mechanical grease working equipment :
* Grease worker cup
* Perforated piston
* Automatic motorized drive system
* Stroke counter
* Control panel
* Safety enclosure
- Why Laboratory Grease Worker Machine is Important ?
Grease consistency can change when subjected to mechanical stress. TheAutomatic Mechanical Grease Worker simulates this stress, helping engineers determine whether the grease will maintain proper lubrication in real operating conditions. Thats why Laboratory grease working machine is important.
- Application of Grease worker ASTM Test Machine :
The grease worker astm test machine is widely used for testing
* Lubricating grease consistency testing
* Quality control in grease manufacturing
* Research and development laboratories
* Petroleum and lubricant testing labs
* Automotive lubricant testing
- Example of what problem Automatic grease working machine solves :
The Automatic grease working machine solves very important problem what normally all grease users faces.
* If grease becomes too soft after working, it may leak from bearings.
* If it becomes too hard, it may not lubricate properly.
- Where grease worker test apparatus commonly used :-
* Grease worker test apparatus commonly used imainly inpetroleum laboratories, lubricant manufacturing plants, quality control labs, and research laboratoriesto determine how grease behaves after being subjected to repeated mechanical stress
- Key Features of Hamco Automatic mechanical grease worker :-
- Hamco Automatic mechanical grease worker is Fully Automatic operations.
- Hamco Astm D217 grease worker for grease penetration test is PLC non touchscreen controller.
- Hamco Grease worker for lubricating grease is available both in single stroke or double stroke model. Single stroke means single sample can be worked at a time and double stroke means two samples worked at a time.
- Hamco Grease worker instrument is also available in both single phase or three phase model.
- Hamco Automatic grease worker for grease testing having safety enclosure for safe operation. It is having emergency switch which can shut off Automatic grease worker immediately.
- Hamco lubricating grease working machine can be setted on stroke wise or time wise. For example you can set stroke from 1 to 9,99,999 strokes and grease worker runs as per the setted stroke and once set counter marke reached it stops , horn buzzer and print the results. Hamco grease worker for petroleum testing lab also can be setted on timewise. Where you can set the timer from 5 min to 99999 min. On set timer once grease worker reach set time, it stops , horn the buzzer and print the result on thermal printer.
- Hamco grease consistency testing machine is having Inbuilt thermal printer to print the results at the end of the test.
- Hamco grease worker laboratory equipment is having inbuilt memory of 400 data.
- Why Hamco ?
- Hamco is leading automatic grease worker manufacturer in India.
- Automatic mechanical grease worker manufacturer in India.
- grease worker equipment exportor in india.
- Automatic grease worker supplier in India.
- Hamco is Leading Manufacturer of Bitumen Testing equipment in India.
- Hamco is Leading Manufacturer of grease testing equipment in India.
- Hamco Automatic Mechanical grease worker Model selection table.
Hamco make automatic grease worker is having two different varieties and all combination is from two different varieties.
* Single or Double stroke & Single or three Phase.
| MODEL NUMBER | STROKE GREASE WORKER | PHASE(POWER SUPPLY) |
| HAMCO68 A/S | SINGLE STROKE | SINGLE PHASE |
| HAMCO68 B/S | DOUBLE STROKE | SINGLE PHASE |
| HAMCO68 A/T | SINGLE STROKE | THREE PHASE |
| HAMCO68 B/T | DOUBLE STROKE | THREE PHASE |
* HERE A MEANS SINGLE STROKE
* HERE B MEANS DOUBLE STROKE
* HERE S MEANS SINGLE PHASE
* HERE T MEANS THREE PHASE.
CATALOGUE FOR AUTOMATIC MECHANICAL GREASE WORKER , MOTORISED WITH DOUBLE STROKE/SINGLE STROKE WITH PLC NON TOUCHSCREEN WITH PRINTER
| CERTIFICATIONS | OUR Mechanical grease worker single stroke/double stroke Model ARE CE Certified Apparatus . We as company is ISO 9001:2008 Certified Company. |
|
MODEL & FEATURES |
HAMCO68A/8B Mechanical grease worker Motorised with double/single stroke has following features.
Non Touchscreen PLC Controller Motorised grease worker to reduce mechanical effort. Single selection of programme and the machine run same as programme. Both the function of set counter as well as timer. For example if you need 1000 stroke or to run 1 hr whoever is early it finishes there. Digital counter for both set time vs Actual time and set counter vs actual counter display. At the end of the test it horns buzzer until we acknowledge it. Emergency button to stop the operation immediately as safety options. Programmable cycle where you can select preprogrammed cycle with fixed counter and timer , make it one click to start the operation.
|
|
TEST METHOD |
For worked penetration and prolongedworked penetration tests to determine consistency of lubricating greases.Consists of single or dual steel ASTM grease workers mounted on a sturdybase and driven by a powerful gear reduction motor. Meets ASTMspecifications for stroke length and rate. Equipped with a presettingelectronic counter that automatically shuts off the drive motor after any desirednumber of strokes up to 99,999. Steel grease workers have threaded cup andcover, and steel plunger plate with shaft and handle that connects to eccentriccam on drive unit. Accessory dial thermometer inserts in plated vent cock.Spring loaded tightening clamps hold grease workers securely on base, andsteel pins in the base facilitate disassembly of grease workers after testing. |
| STANDARD | Confirms to ASTM D217, D4950; IP 50; ISO 2137; DIN 51804; FTM 791-311, 791-313 |
| STROKE SPEED | 60+/- 10 Stroke per Minute. |
| UNWORKED, WORKED AND EXTENDED WORK | UNWORKED STROKE : 0
WORKED STROKE : 60 EXTENDED WORK : 1,00,000 |
| MOTOR | HP THREE PHASE MOTOR WITH REDUCTION GEAR BOX WITH BOTH SIDE SHAFT . |
| TYPE OF
GREASE WORKER |
Automatic Grease Worker with Motorized function with programed mode to prefix the preprogrammed counter of stroke or time. |
|
APPLICATION |
A Automatic Mechanical Grease Worker is used to simulate the mechanical working that lubricating greases undergo in real-life service (such as in bearings, gears, or joints).
It prepares worked grease samples for penetration and consistency testing. Motorised Grease worker reduces human effort and Automation helps in making the operations easier.
|
|
CONSTRUCTION |
Body Frame is made of aluminum which makes it light weight and corrosion resistant and heavy duty.
Control panel is made galvanized iron with powder coating. |
|
PRINTING |
Thermal printer capable to value the test status by printing Date, Time, Sample Id, Sample name, Operator name, No of stroke and Actual time and Remark. |
|
DISPLAY |
HA CONTROLLER PLC NON TOUCH SCREEN DISPLAY
Thermal printer Emergency switch to stop immediately all output. Hooter to indicate once the stroke counter over or time over or any fault. Main switch to start the Operation. |
| GREASE CUP AND HANDLE | Detachable grease worker cup with Handle and cover.
Cup Handle is guide in bearing to reduce friction and noise. |
| ACCESSORIES SUPPLIED ALONG WITH THE INSTRUMENTS | Grease Worker Cup with Handle — 2 NO(CAT NO HAMCO 68AC1)
|
| UTILITIES (PREINSTALLATION REQUISITE)
AT BUYER SCOPE |
Sample Grease pprox.. 500 gm
Washing Solvent. 1. Big Spatula to fill or Remove grease into Grease cup |
| MODEL NO | STROKE GREASE WORKER | POWER SUPPLY |
| HAMCO68A/S | SINGLE STROKE | SINGLE PHASE |
| HAMCO68B/S | DOUBLE STROKE | SINGLE PHASE |
| HAMCO68A/T | SINGLE STROKE | THREE PHASE |
| HAMCO68B/T | DOUBLE STROKE | THREE PHASE |
We are Automatic Mechanical Grease Worker Manufacturer in India,Mechanical Grease Working Equipment Manufacturer,Grease Worker Machine Manufacturer in India,Automatic Grease Working Machine Manufacturer,Grease Worker Instrument Supplier etc.
