HAMCO 99A Automatic Potentiometric Titration (SINGLE BURRETTE)

Test Method : Aniline point is used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures. Equal volumes of aniline and sample or sample plus n-heptane are stirred together while being heated at a controlled rate. After the two phases become miscible, the mixture is cooled at a controlled rate and the temperature at which the two phases separate is the aniline point or mixed aniline point of the sample.

Standard :

Conforms to: ASTM D611; IP 2; ISO 2977; DIN 51775; FTM 791-3601.

Features & Benefits :

For aniline point and mixed aniline point determinations according to Method B. Stirs aniline-sample mixture in a borosilicate glass thin film tube suspended in a heating bath. Thin film of mixture flows over a light well illuminated by a variable 6V lamp. Adjust heating rate per specifications using accessory Power control Heater. When lamp filament brightens inside well, allow mixture to cool until the two phases separate as indicated by obscuring of the lamp filament. Consists of thin film tube; 400mL Pyrex™ beaker; cover assembly with bath stirrer, sample pump rotor and cooling coil; 6V lamp with line cord; and drive motor. Positive drive pulley system rotates sample and bath stirrers. Accessory Power control Heater has variable step less control and a reference dial for repeatable control of heating rate. Porcelain refractory top plate shields 75OW heater and has a positioning well for the Borosilicate bath. Low voltage receptacle in heater housing accepts line cord of 6V lamp.

Accessories Will Be Supplied With Equipment :

  • 1) Outer jacket with cork 1 NO (cat no HAMCO 5AC1)
  • 2) Tube with cork – 1 NO (cat no HAMCO5AC2)
  • 3) Brass stirrer inner – 1 NO (cat no HAMCO 5AC3)

Spares Required For 5 Year Trouble Free Operation :

  • Outer jacket with cork 2 NO (cat no HAMCO 5AC1)
  • Tube with cork – 2 NO (cat no HAMCO5AC2)
  • Brass stirrer inner – 2 NO (cat no HAMCO 5AC3)

Electrical Requirement :

  • 220-240V, 50/60Hz, Single Phase, 2.9A
  • OR 115V, 50/60Hz, Single Phase, 5.8A

Dimension : Ixwxh,in.(cm)

  • Ixwxh,in, (cm)
  • 14.518.520.5 (37x22x53)
  • Net Weight: 24 lbs (10.9kg)

Shipping Information :

  • Shipping Weight: 42 lbs (19.1kg)
  • Dimensions: 5.7 Cu. ft.

Ordering Information:

CATALOGUE NO PRODUCT DESCRIPTION ELECTRICAL REQUIREMENT
Hamco 5 Aniline point apparatus
Hamco 5ac1 Outer jacket with cork
Hamco 43ac2 Tube with cork
Hamco 43s1 Brass stirrer inner

Fill The Given Below Form For Download PDF

    Get In Touch

      X
      Get In Touch