Manufacturer of Oil, Petrol, Grease, Wax, bitumen, Coal, Paint, Water Testing instruments , Pharmaceutical Testing chambers, Heating and Cooling Equipment.
Capillary Glass Viscometer Manufacturer in India

Capillary Glass Viscometer Manufacturer in India

Cannon Fenske Routine Viscometer

  • The Cannon-Fenske Routine viscometer is a rugged viscometer that works well if the liquid to be measured is transparent or translucent.
  • In general, if the meniscus (the curvature at the top of the liquid column) can be readily observed through a column of liquid 3-mm in diameter, the Cannon-Fenske Routine viscometer and other transparent-type viscometers (like BS/U-Tube viscometers) can be used.
  • Suitable for Lubricating, transformer and fuel oils.
  • Sample volume required 7 ml
  • Bath depth required: 203mm (8”)

Cannon Fenske Reverse Flow Viscometer :

  • Special reverse flow viscometers have been designed for testing opaque liquids.
  • Reverse flow viscometers wet the timing section of the viscometer capillary only during the actual measurement.
  • The Cannon-Fenske Opaque, Zeitfuchs Cross-Arm, and BS/IP/RF U-Tube viscometers are all reverse flow types.
  • Reverse flow viscometers must be cleaned, dried, and refilled before a repeat measurement can be made.
  • In contrast, other viscometer types commonly used to measure transparent liquids allow the same sample to be repeatedly drawn up into the capillary, permitting multiple measurements for verification.
  • Suitable for Lubricants, transformer, fuel oils and Pain industry.
  • Sample volume required : 12ml
  • Bath Depth required: 225mm (9”)

BS/U Type Viscometer :

  • It is used measure viscosity of Transparent Newtonian Liquid.
  • In general, if the meniscus (the curvature at the top of the liquid column) can be readily observed through a column of liquid 3-mm in diameter, the BS/U type and other transparent-type viscometers (like cannon Fenske routine viscometers) can be used.
  • Suitable for Chemical, fuel, lubricants and transformer oils.
  • Sample Volume Required: 7 ml (size A to C), 12 ml( Size D to F ) , 23ml ( size G to H).
  • Bath Depth Required : 280mm ( 11”)

U Tube Reverse Flow Viscometer :

  • Viscometers have been designed for testing opaque liquids.
  • Reverse flow viscometers wet the timing section of the viscometer capillary only during the actual measurement.
  • The Cannon-Fenske Opaque, Zeitfuchs Cross-Arm, and cannon Fenske reverse flow are all reverse flow types.
  • Reverse flow viscometers must be cleaned, dried, and refilled before a repeat measurement can be made.
  • In contrast, other viscometer types commonly used to measure transparent liquids allow the same sample to be repeatedly drawn up into the capillary, permitting multiple measurements for verification.
  • Sample Volume required : 7 ml
  • Bath depth required: 280mm (11”)

Suspended Level Shortened Form :

  • It is used to measure the viscosity of transparent Newtonian oils.
  • Unlike the Cannon-Fenske Routine viscometer, suspended level viscometers possess the same viscometer constant at all temperatures.
  • This property is advantageous when measurements are to be made at a number of different temperatures
  • Suitable for Lubricants, fuel and transformer oil especially at low temp.
  • Sample volume required : 11 ml
  • Bath depth required : 250mm ( 10”)

Suspended Level :

  • It is used to measure the viscosity of transparent Newtonian oils.
  • Unlike the Cannon-Fenske Routine viscometer, suspended level viscometers possess the same viscometer constant at all temperatures.
  • This property is advantageous when measurements are to be made at a number of different temperatures.
  • Suitable for Lubricants, paint industry.
  • Sample volume required : 11 ml
  • Bath depth required: 250mm (10”)

Ubbelhode :

  • The Ubbelhode viscometer and other suspended level viscometers are also used to measure transparent liquids.
  • Unlike the Cannon-Fenske Routine viscometer, suspended level viscometers possess the same viscometer constant at all temperatures.
  • This property is advantageous when measurements are to be made at a number of different temperatures.
  • Suitable for polymers and at all temperatures.
  • Sample Volume required : 11 ml
  • Bath Depth required : 250mm ( 10” )